Misted/Foggy Double Glazing: Causes and Fixes

If one of your double-glazed windows has gone cloudy or foggy and you can’t wipe it clear, the moisture is trapped between the two panes. This is one of the most common double glazing faults — and it means the sealed unit has failed. Here’s why it happens and what you can do.

Why it happens

A double-glazed unit relies on an airtight seal around its edge to keep the gap dry and (where fitted) full of argon. Over years of thermal expansion and contraction, exposure to weather and UV, that seal can eventually break down. Once it fails, moist air seeps into the gap, and when the temperature drops, moisture condenses on the inside of the panes — the misting you see. Poor drainage around the frame, which lets water sit against the seal, can accelerate it.

Can misted glazing be fixed?

  • Replace the sealed unit: the proper, lasting fix. The frame, hinges and handles stay; only the glass unit is swapped. This is usually straightforward and far cheaper than a whole new window.
  • “De-misting” / drilling: some firms offer to drill, dry and reseal a misted unit. It can clear the fog temporarily, but it doesn’t restore the original sealed, gas-filled performance, and results vary. Most experts prefer replacing the unit.

Does it affect performance?

Yes. A failed unit has usually lost its argon and its seal, so its insulation drops and its U-value worsens — the window is no longer performing as designed. Beyond the cloudy look, you’re losing some of the efficiency you paid for, which is another reason to replace it rather than live with it.

Is it covered by a guarantee?

If your windows are still within their guarantee (and especially an insurance-backed one), a failed unit should be replaced at no or low cost — another reason to buy quality and keep your paperwork. Outside the guarantee, replacing a single unit is a modest job for any glazier.

Repair or replace the window?

A single misted unit rarely justifies a whole new window — just replace the glass. But if many units have failed across old windows, that points to windows at the end of their life, and whole replacement may be better value. Our guide on repair vs replace helps you decide.

Preventing it

You can’t entirely prevent eventual seal failure, but quality units, good drainage around the frame and keeping weep holes clear (part of routine maintenance) all help units last. If several units in a recent installation fail early, that points to a manufacturing issue worth raising with the installer under guarantee.

How long do sealed units last?

There’s no fixed expiry date, but a quality sealed unit typically stays clear for 15–20 years or more, while cheaper units or those in exposed, poorly drained frames can fail sooner. Units low down, where water pools, and those on sun-baked elevations tend to go first. If one unit in a recent installation mists up, it’s likely a one-off manufacturing fault covered by guarantee; if several across old windows fail around the same time, the windows are simply reaching the end of their life.

Getting a replacement unit made

Replacing a failed unit is a routine job. A glazier measures the exact sealed-unit size and glass spec (you’ll want to match the low-E and argon spec of the rest), orders a new unit, and swaps it into the existing frame — usually in under an hour per window once the glass arrives. Try to match the specification so the repaired window performs like its neighbours. Keep the installer’s details and any guarantee for the new unit in case it’s ever needed.

Related guides

Ready to get quotes? Find trusted local double glazing installers on our directory and compare them side by side — it’s free and there’s no obligation.

Sources & further reading

Get your business in front of homeowners

Add your double glazing business to the UK’s biggest fenestration directory — homeowners near you are searching for quotes right now.

Add your business
AdAdvertisement
Get free quotes