Common uPVC Door Problems and Solutions

uPVC doors are reliable, but like anything in daily use they can develop niggles over time. The good news is that many are simple to put right, often without a professional. Here are the most common problems and what to do about them.

The door is hard to lock or the handle needs lifting hard

This usually means the door has dropped or expanded slightly so the multi-point locking points no longer line up with their keeps. The fix is to adjust the hinges (most uPVC hinges allow height and compression adjustment) so the door sits square in the frame again. Sometimes the keeps on the frame need a small adjustment instead. Our hinge adjustment guide shows the principles.

The door sticks or catches

uPVC expands in heat, so a door may bind on warm days. If it catches year-round, the hinges likely need adjusting. Also check for a build-up of dirt in the seals or threshold and clean it out — a surprising number of “sticking” doors just need the channel cleared.

Draughts around the door

Worn or flattened seals (gaskets) are the usual cause. They can be replaced relatively easily. Adjusting hinge compression can also pull the door tighter against the seal — the same principle as fixing a draughty window.

The handle is loose or floppy

Often just a loose fixing screw behind the handle — tighten it. If the handle spins freely, the internal spindle or the mechanism may be worn and need replacing, which is a standard, inexpensive part.

The lock won’t turn

Try lubricating the cylinder with a graphite or PTFE lubricant (not oil, which gums up). If a key turns but doesn’t throw the bolts, the gearbox in the multi-point lock may have failed and need replacing — a common, fixable fault. When replacing a cylinder, fit a TS007 3-star snap-resistant one for security.

Condensation or draughts through the glass

If a glazed panel in the door has misted up, the sealed unit has failed and the glass can be replaced without a new door.

When to call a professional

Hinge and keep adjustments and seal swaps are often DIY-friendly, but a failed lock gearbox, a dropped slab that won’t adjust, or security concerns are best handled by a glazier or locksmith. If your door is old and problems are stacking up, it may be time to consider a new composite or uPVC door rather than repeated repairs.

Tools and quick checks before you call someone

Before booking a tradesperson, a few checks often reveal an easy fix. Look for a loose handle screw (tighten it), dirt in the seals or threshold (clean it), and whether the door has dropped so the lock points miss their keeps (a hinge adjustment). A Torx/Allen key, a screwdriver and a PTFE lubricant handle most minor door niggles. If the door simply needs squaring up or lubricating, you’ve saved a call-out; if the lock gearbox has failed, you’ll at least know what to tell the locksmith.

When to repair and when to replace the door

Individual faults — a failed lock, worn seals, a loose handle, a misted glazed panel — are standard, inexpensive repairs, and a sound uPVC door is well worth keeping. Consider a new door when problems stack up, the slab itself is warped or discoloured, security is weak and can’t be upgraded, or you simply want better insulation and kerb appeal. As with windows, repeated repairs on a tired door can eventually cost more than replacing it — weigh the running total against a new door’s benefits.

Related guides

Ready to get quotes? Find trusted local double glazing installers on our directory and compare them side by side — it’s free and there’s no obligation.

Sources & further reading

Get your business in front of homeowners

Add your double glazing business to the UK’s biggest fenestration directory — homeowners near you are searching for quotes right now.

Add your business
AdAdvertisement
Get free quotes